A KDHE404DSS that halts mid-cycle as though overfilled, even with a normal water level, usually has a float switch stuck in the raised position.
KitchenAid KDPM804KBS
The KDPM804KBS is a KitchenAid dishwasher, and the model prefix is what settles that: KDP is one of the prefixes KitchenAid uses for dishwashers. Whether the KDPM804KBS is still in production is not established by that source either, so availability of the particular part is checked before any work on a KDPM804KBS is quoted rather […]
KitchenAid KDHE704DSS
Wash motor bearing wear shows up early on a KDHE704DSS as a rising whine that gets louder as the cycle heats up, well before the motor actually seizes.
KitchenAid KBDS250X
On the KBDS250X, a drain pump that hums without moving water is the complaint we hear most, usually traced to a jammed impeller or a clogged sump rather than a burned-out motor.
KitchenAid KDPE234GPS
On the KDPE234GPS, a float switch stuck in the up position tells the control the tub is overfull even when it isn’t, halting the cycle for no obvious reason.
KitchenAid KCDB250G
A smell from the tub on a KCDB250G almost always traces back to the filter and sump rather than anything mechanical, so those get cleared before anything else is touched.
KitchenAid KDPM804KPS
When one rack washes clean and the other comes out dirty on a KDPM804KPS, the diverter or the wash-arm feed supplying that rack is the more likely problem than the pump.
KitchenAid KCDC150K
When one rack washes clean and the other comes out dirty on a KCDC150K, the diverter or the wash-arm feed supplying that rack is the more likely problem than the pump.
KitchenAid KDTE104DSS
A KDTE104DSS that either never fills or keeps filling past the normal level usually has an inlet valve stuck rather than a bad water-level sensor.
KitchenAid KCDC250K
A KCDC250K that either never fills or keeps filling past the normal level usually has an inlet valve stuck rather than a bad water-level sensor.