KitchenAid Dishwasher

KitchenAid KDPM804KPS

Model # KDPM804KPS

The KDPM804KPS belongs to KitchenAid’s US dishwasher catalogue. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. KitchenAid was still listing it on its US product site at the December 2025 capture, so this is a current model rather than an out-of-production one.

On a KDPM804KPS of this age, a fault is normally traced to one part rather than to accumulated wear. The KDPM804KPS being current, supply is not the problem it can be on older machines; we still check the individual part before quoting.

Key Features

  • No published specification for this model was recovered
  • Still recorded on KitchenAid's US product site at the December 2025 capture
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

A diverter or wash-arm feed fault that leaves one rack washing and the other not

02

A drain pump that hums but moves no water, leaving standing water in the sump at the end of a cycle

03

Wash motor bearing wear, heard as a rising whine or grinding through the cycle

04

A door latch or latch switch that no longer tells the control the door is shut, so the cycle will not start

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KDPM804KPS FAQ

KitchenAid places the plate on the left edge of the dishwasher's door, so that is where the KDPM804KPS label will be. Model and serial are printed on the same sticker. Getting the KDPM804KPS number exactly right matters most on an older machine, where parts diverged between otherwise identical-looking siblings.

A single component failing on a KDPM804KPS at this age is not unusual and says nothing about the machine as a whole. On a current model like the KDPM804KPS the part is normally straightforward to obtain, so the repair is a short one.

That pattern on a KDPM804KPS points at the upper spray arm feed rather than the pump: a blocked arm, a split feed tube, or a diverter that is not sending water up. With the dishwasher switched off at its supply, each of those on a KDPM804KPS is inspected in turn.

Need a repair? We're ready to help. Call Now
Call Us Schedule