KitchenAid Dishwasher

KitchenAid KDPE234GPS

Model # KDPE234GPS

KDPE234GPS is one of the dishwasher model numbers KitchenAid carried in the United States. No published specification for this model was recovered. Rather than fill the gap with a figure borrowed from a similar-looking number, this page says only what the sources actually carry. It appears on KitchenAid’s US product site in December 2017 and nowhere after that.

The KDPE234GPS is recent enough that age alone is rarely the explanation, and a specific component is usually at fault. The KDPE234GPS is discontinued, so the parts question gets answered first and the price second.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in December 2017
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Filter and sump blockages, the commonest reason for poor drainage and a smell from the tub

02

A float switch held up, which the control reads as an overfill and stops the cycle

03

Control board and touch panel faults after years of steam and heat cycling

04

Rack rollers and rail wear, so a loaded rack drops or jams halfway out

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KDPE234GPS FAQ

KitchenAid gives the location for its dishwashers as on the left edge of the dishwasher's door, and that is where the KDPE234GPS plate sits. It is an adhesive label, typically silver on major appliances, carrying the model number and the serial number together. Read the whole KDPE234GPS string off the label rather than from memory, because it sits in a family of very similar numbers.

Production of the KDPE234GPS ended some time ago. That does not rule out a repair - the wear items are largely shared across a generation - but it does mean the parts question on a KDPE234GPS is settled before any figure is put on the work.

With the dishwasher switched off at its supply, the filter and the sump on a KDPE234GPS are the first things to clear, because food debris there accounts for most standing-water complaints. If a KDPE234GPS still holds water after that, the drain pump or the drain hose run is the next thing to test.

Need a repair? We're ready to help. Call Now
Call Us Schedule