KitchenAid Dishwasher

KitchenAid KCDC150K

Model # KCDC150K

KCDC150K is one of the dishwasher model numbers KitchenAid carried in the United States. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. It sat in KitchenAid’s US catalogue from November 2001 until December 2005, which is the window the archive records.

A KCDC150K still in a kitchen today has twenty-odd years behind it, and that age shows first in the door seal, the pump and the spray system. Being out of production, a KCDC150K has its parts position checked at the outset rather than after a diagnosis.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from November 2001 to December 2005
  • No rating-plate revision code was observed for this model

Most Common Issues on This Model

01

A diverter or wash-arm feed fault that leaves one rack washing and the other not

02

A drain pump that hums but moves no water, leaving standing water in the sump at the end of a cycle

03

Wash motor bearing wear, heard as a rising whine or grinding through the cycle

04

A door latch or latch switch that no longer tells the control the door is shut, so the cycle will not start

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KCDC150K FAQ

The plate on the left edge of the dishwasher's door carries everything needed: the full KCDC150K model string and the serial number beside it. With those two, a part for a KCDC150K can be identified before anyone travels out, which saves a wasted visit.

The KCDC150K is out of production, and whether repair beats replacement comes down to which component has gone. A seal, a switch or a control is usually straightforward economics on a KCDC150K; a major assembly on a machine of this age often is not, and we will say which one you are looking at.

Yes, and it is one of the cheaper repairs. Rack rollers and rails on a KCDC150K wear and the rack then drops at one corner. With the dishwasher switched off at its supply, the rollers on a KCDC150K are inspected off the rails, and they are replaced rather than adjusted.

Need a repair? We're ready to help. Call Now
Call Us Schedule