KitchenAid Dishwasher

KitchenAid KCDB250G

Model # KCDB250G

The KCDB250G is one of the KitchenAid dishwashers. No published specification for this model was recovered. Rather than fill the gap with a figure borrowed from a similar-looking number, this page says only what the sources actually carry. KitchenAid’s US product site carried it from June 2001 to July 2015, and nothing was captured for it afterwards.

That puts the KCDB250G two decades or more into use, which is where the door seal, the pump and the spray system start to decide how the machine behaves. The KCDB250G is discontinued, so the parts question gets answered first and the price second.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from June 2001 to July 2015
  • No rating-plate revision code was observed for this model

Most Common Issues on This Model

01

Filter and sump blockages, the commonest reason for poor drainage and a smell from the tub

02

A float switch held up, which the control reads as an overfill and stops the cycle

03

Control board and touch panel faults after years of steam and heat cycling

04

Rack rollers and rail wear, so a loaded rack drops or jams halfway out

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KCDB250G FAQ

KitchenAid places the plate on the left edge of the dishwasher's door, so that is where the KCDB250G label will be. Model and serial are printed on the same sticker. Getting the KCDB250G number exactly right matters most on an older machine, where parts diverged between otherwise identical-looking siblings.

Then the job stops there and you are told. The KCDB250G has been out of production for long enough that this is a real possibility on some components, which is why availability for a KCDB250G is checked before a diagnosis is charged for rather than after.

That pattern on a KCDB250G points at the upper spray arm feed rather than the pump: a blocked arm, a split feed tube, or a diverter that is not sending water up. With the dishwasher switched off at its supply, each of those on a KCDB250G is inspected in turn.

Need a repair? We're ready to help. Call Now
Call Us Schedule