The KIRS608BSS is one of the KitchenAid ranges. No published specification for this model was recovered. Rather than fill the gap with a figure borrowed from a similar-looking number, this page says only what the sources actually carry. It was on KitchenAid’s US product site from November 2014 to May 2016 and gone after that.
KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KIRS608BSS0. A plate reading one of those is still a KIRS608BSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. That puts a KIRS608BSS roughly ten to fifteen years into service, the point at which the door seal, the oven sensing and the surface controls tend to need attention. The KIRS608BSS is discontinued, so the parts question gets answered first and the price second.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site from November 2014 to May 2016
- Rating-plate revision codes observed for this model: KIRS608BSS0
- A KitchenAid owner's manual for this model is on record
Most Common Issues on This Model
An oven igniter that glows but no longer draws enough current to open the gas valve, on a gas configuration
Surface ignition clicking without lighting, usually moisture or debris at the igniter, on a gas configuration
A surface element or its infinite switch failing, so one zone stays cold or runs at full heat
Door hinge and seal wear, letting heat out of the front of the oven