KitchenAid Range

KitchenAid KERC507H

Model # KERC507H

KERC507H is one of the range model numbers KitchenAid carried in the United States. What KitchenAid published about the KERC507H is that it is a 30″ Freestanding Electric Range with Ceramic-glass Cooktop, and that single line is all the specification there is. The only dated record of it is a capture of KitchenAid’s US product site from February 2000.

KitchenAid’s archived product page for the KERC507H also prints KERC507HAL, KERC507HBT, which are the same machine in different colours and finishes. A plate reading one of those belongs on this page too. That puts the KERC507H two decades or more into use, which is where the door seal, the oven sensing and the surface controls start to decide how the machine behaves. Being out of production, a KERC507H has its parts position checked at the outset rather than after a diagnosis.

Key Features

  • 30" Freestanding Electric Range with Ceramic-glass Cooktop
  • Recorded on KitchenAid's US product site in February 2000
  • No rating-plate revision code was observed for this model

Most Common Issues on This Model

01

Oven door glass slipped in its frame after repeated heat cycles

02

A bake or broil element that has failed, so the oven heats slowly or from one side only, on an electric configuration

03

Oven temperature sensor drift, leaving the cavity hot or cold against the temperature set

04

A surface element or its infinite switch failing, so one zone stays cold or runs at full heat

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KERC507H FAQ

No - front badging is a series name, not a model number. The KERC507H number comes off the plate inside the oven's door, and that is the string to work from. Two machines wearing the same front badge can differ in parts, so the KERC507H plate is what settles it.

Often yes, and where they cannot we say so at the point we find out, so you are not billed for work that cannot be completed. That check comes first on a discontinued model like the KERC507H, not last.

On most builds it can, but it is heavy and the hinges are under spring tension. With the range switched off at its supply and the oven cold, the hinge locks on a KERC507H are engaged before the door is lifted. If the door of a KERC507H does not release easily, it is better left to a technician.

Need a repair? We're ready to help. Call Now
Call Us Schedule