KitchenAid Refrigerator

KitchenAid KSRS25FTSS

Model # KSRS25FTSS

The KSRS25FTSS is a US-market KitchenAid refrigerator. It was on KitchenAid’s US product site from May 2012 to February 2013 and gone after that. That places the machine inside that window: discontinued, and now about a decade into service. No published specification for this model was recovered. What survives is the model number and a dated record of when KitchenAid was showing it, and that is what is set out here.

KitchenAid appends a two-digit production-revision code to the base number on the rating plate, and the codes actually observed for this model are KSRS25FTSS00, KSRS25FTSS01, KSRS25FTSS03. A plate reading one of those is still a KSRS25FTSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A cabinet of this vintage is past the point where the door seal, the evaporator fan and the defrost components are as-new, and those account for most of what a KSRS25FTSS is called out for. Since the model is discontinued, we settle what can still be supplied for it before the work is quoted.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from May 2012 to February 2013
  • Rating-plate revision codes observed for this model: KSRS25FTSS00, KSRS25FTSS01, KSRS25FTSS03
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Evaporator fan bearing wear, ending in a fan that will not start from cold

02

Condenser coils choked with dust and pet hair, making the compressor run longer and hotter than it was meant to

03

Sagging doors and worn hinge cams, which stop the seal meeting the cabinet squarely

04

Drain blockage at the back of the freezer floor - a routine clear rather than a sealed-system job

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KSRS25FTSS FAQ

Inside the refrigerator, on the left wall is where KitchenAid says the label is, and that holds for the KSRS25FTSS. The adhesive label there gives model and serial. Copying the KSRS25FTSS string character by character is worth the extra minute, since one letter separates several different cabinets.

It is discontinued, so parts availability is the question that decides everything else. We look up what can still be supplied for a KSRS25FTSS at the outset, and if the part that has failed cannot be had we say so plainly instead of charging for a diagnosis that leads nowhere.

With the refrigerator switched off at its supply, leaving the KSRS25FTSS propped open to the air is sensible if it is no longer holding temperature, because a closed cabinet that is not cooling grows mould quickly. Food safety comes first on a KSRS25FTSS as on anything else, and anything that has sat above a safe temperature for hours should go in the bin.

Need a repair? We're ready to help. Call Now
Call Us Schedule