KitchenAid KUWR304CSS

A blocked drain at the back of the freezer floor is a routine fix on the KUWR304CSS and does not involve the sealed system at all. Sealed-system problems are the more serious possibility, and if a refrigerant leak or restriction is found, we weigh that plainly against the cabinet’s value before recommending a repair.

KitchenAid KTRS22MHWH

Electronic control failure is a notable issue on the KTRS22MHWH, where the cabinet keeps running but the panel loses all response. Condenser coils choked with dust are the other, more common issue, making the compressor run longer and hotter than it should.

KitchenAid KURL304EBS

Lighting and door-switch problems are worth ruling out on the KURL304EBS before assuming anything about the cooling side. A door seal gone stiff is the other issue to check, letting warm air track in along one edge.

KitchenAid KTRS25KG

A control reading the cabinet wrongly is a common issue on the KTRS25KG, causing the compressor to run far longer or far shorter than it should. A failed start device is the other thing to check if the compressor hums briefly before dropping out on overload.

KitchenAid KURO24LSBX

Sealed-system problems on the KURO24LSBX are weighed carefully against the value of the cabinet, since a refrigerant leak or restriction can be significant. A blocked drain at the back of the freezer floor is a far more common and cheaper cause of water where it shouldn’t be.

KitchenAid KTRS25KGAL

Door switch and interior lighting problems are common on the KTRS25KGAL, sometimes leaving the lamp lit with the door shut. Ice production tailing off is the other issue to check, usually the fill valve, a frozen fill tube, or the module itself.

KitchenAid KURO24RSBX

Restricted condenser airflow is the commonest reason an older KURO24RSBX slowly loses its grip on temperature. A blocked defrost drain is the other issue to check, leaving water under the crispers or running out onto the floor.

KitchenAid KTRS25KGBL

Loss of refrigerant charge is the more serious issue to rule out on a KTRS25KGBL that isn’t cooling well, since it is the finding that decides whether repair makes sense. A blocked defrost drain is the far more common and cheaper cause of water showing up where it shouldn’t.

KitchenAid KURR104EPA

A weeping inlet valve is worth checking first on a KURR104EPA that is leaving water behind the cabinet — it is a slow drip rather than a burst line, so it is easy to miss until the floor underneath has taken damage. Control board problems are the other thing to rule out if the cabinet […]

KitchenAid KTRS25KGWH

A condenser fan that has seized or slowed is a common cause of poor cooling on the KTRS25KGWH, usually showing up first in warm weather. A drain tube silted up with debris is the other thing to check, and clearing it is a simple, inexpensive job.

Need a repair? We're ready to help. Call Now
Call Us Schedule