KitchenAid Range

KitchenAid KFED500EBS

Model # KFED500EBS

The KFED500EBS is a KitchenAid range. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. It appears on KitchenAid’s US product site in January 2018 and nowhere after that.

The KFED500EBS is recent enough that age alone is rarely the explanation, and a specific component is usually at fault. Being out of production, a KFED500EBS has its parts position checked at the outset rather than after a diagnosis.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in January 2018
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

A surface element or its infinite switch failing, so one zone stays cold or runs at full heat

02

Door hinge and seal wear, letting heat out of the front of the oven

03

A door lock stuck after a self-clean cycle

04

Control board relay faults, where one function is dead and the rest of the range carries on

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KFED500EBS FAQ

KitchenAid gives the location for its ranges as inside the oven's door, and that is where the KFED500EBS plate sits. It is an adhesive label, typically silver on major appliances, carrying the model number and the serial number together. Read the whole KFED500EBS string off the label rather than from memory, because it sits in a family of very similar numbers.

Production of the KFED500EBS ended some time ago. That does not rule out a repair - the wear items are largely shared across a generation - but it does mean the parts question on a KFED500EBS is settled before any figure is put on the work.

With the range switched off at its supply, the oven temperature sensor on a KFED500EBS is the first part measured, because a drifted sensor makes the control heat to the wrong figure. Only once the sensor on a KFED500EBS has been proved are the heating components considered.

Need a repair? We're ready to help. Call Now
Call Us Schedule