KitchenAid Range

KitchenAid KERC507HAL

Model # KERC507HAL

The KERC507HAL belongs to KitchenAid’s US range catalogue. KitchenAid’s published description of the KERC507HAL is a 30″ Freestanding Electric Range with Ceramic-glass Cooktop. No other specification for it survives in the sources used here. KitchenAid’s US product site shows it in February 2000, and no later capture carries it.

The KERC507HAL is a colour or finish variant, printed verbatim on KitchenAid’s archived product page for the KERC507H. An owner whose plate reads KERC507H, or one of its other finishes, is looking at the same machine in a different colour. The other finishes printed on that same page are KERC507HBT. A KERC507HAL still in a kitchen today has twenty-odd years behind it, and that age shows first in the door seal, the oven sensing and the surface controls. Discontinued does not mean unrepairable, but it does mean availability of the specific part for a KERC507HAL is established before any figure is put on the job.

Key Features

  • 30" Freestanding Electric Range with Ceramic-glass Cooktop
  • Recorded on KitchenAid's US product site in February 2000
  • Printed as a colour or finish variant on KitchenAid's archived product page for the KERC507H

Most Common Issues on This Model

01

Touch panel or clock display faults after long service

02

Convection fan noise or failure, where a convection cavity is fitted

03

A thermal fuse tripped after self-clean, leaving the oven without power while the surface still works

04

Oven lamp, lamp holder and switch failures

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KERC507HAL FAQ

The KERC507HAL label sits inside the oven's door, in KitchenAid's own words. It is the adhesive label used across their major appliances and it carries both numbers. A photograph of the KERC507HAL label is the most reliable thing you can send us.

Not usually in labour. What age changes on a KERC507HAL is the chance that a given part has to come from a specialist supplier rather than off the shelf, and that is established at the outset so the price you are given is the price of the actual job.

With the range switched off at its supply, the oven temperature sensor on a KERC507HAL is the first part measured, because a drifted sensor makes the control heat to the wrong figure. Only once the sensor on a KERC507HAL has been proved are the heating components considered.

Need a repair? We're ready to help. Call Now
Call Us Schedule