
KERC507H is one of the range model numbers KitchenAid carried in the United States. What KitchenAid published about the KERC507H is that it is a 30″ Freestanding Electric Range with Ceramic-glass Cooktop, and that single line is all the specification there is. The only dated record of it is a capture of KitchenAid’s US product site from February 2000.
KitchenAid’s archived product page for the KERC507H also prints KERC507HAL, KERC507HBT, which are the same machine in different colours and finishes. A plate reading one of those belongs on this page too. That puts the KERC507H two decades or more into use, which is where the door seal, the oven sensing and the surface controls start to decide how the machine behaves. Being out of production, a KERC507H has its parts position checked at the outset rather than after a diagnosis.
Key Features
- 30" Freestanding Electric Range with Ceramic-glass Cooktop
- Recorded on KitchenAid's US product site in February 2000
- No rating-plate revision code was observed for this model
Most Common Issues on This Model
Oven door glass slipped in its frame after repeated heat cycles
A bake or broil element that has failed, so the oven heats slowly or from one side only, on an electric configuration
Oven temperature sensor drift, leaving the cavity hot or cold against the temperature set
A surface element or its infinite switch failing, so one zone stays cold or runs at full heat
