KitchenAid Range

KitchenAid KERC500E

Model # KERC500E

KERC500E is one of the range model numbers KitchenAid carried in the United States. KitchenAid’s own product material describes it as a Freestanding Electric Range with Four Radiant Cooktop Elements, and that description is the whole of the published specification recovered for the KERC500E. KitchenAid’s US product site shows it in March 2000, and no later capture carries it.

A KERC500E still in a kitchen today has twenty-odd years behind it, and that age shows first in the door seal, the oven sensing and the surface controls. Since the model is out of production, we settle what can still be supplied for it before the work is quoted.

Key Features

  • Freestanding Electric Range with Four Radiant Cooktop Elements
  • Recorded on KitchenAid's US product site in March 2000
  • No rating-plate revision code was observed for this model

Most Common Issues on This Model

01

A surface element or its infinite switch failing, so one zone stays cold or runs at full heat

02

Door hinge and seal wear, letting heat out of the front of the oven

03

A door lock stuck after a self-clean cycle

04

Control board relay faults, where one function is dead and the rest of the range carries on

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KERC500E FAQ

The KERC500E label sits inside the oven's door, in KitchenAid's own words. It is the adhesive label used across their major appliances and it carries both numbers. A photograph of the KERC500E label is the most reliable thing you can send us.

Not usually in labour. What age changes on a KERC500E is the chance that a given part has to come from a specialist supplier rather than off the shelf, and that is established at the outset so the price you are given is the price of the actual job.

With the range switched off at its supply, the oven temperature sensor on a KERC500E is the first part measured, because a drifted sensor makes the control heat to the wrong figure. Only once the sensor on a KERC500E has been proved are the heating components considered.

Need a repair? We're ready to help. Call Now
Call Us Schedule