Low Risk - DIY Check OK

KitchenAid Refrigerator PO Error Code

Built-In Refrigerator, French Door Bottom-Freezer Refrigerator and Side-by-Side Refrigerator: KitchenAid publishes PO for all three families and the text is identical on each. It defines PO as a power-outage indicator - "The Power Outage indicator lets you know if the…

What PO Means

Built-In Refrigerator, French Door Bottom-Freezer Refrigerator and Side-by-Side Refrigerator: KitchenAid publishes PO for all three families and the text is identical on each. It defines PO as a power-outage indicator - "The Power Outage indicator lets you know if the power supply to the refrigerator has been off and the freezer temperature has risen to 18 degrees F (-8 degrees C) or higher." The control sounds an alert tone three times and blinks "Confirm" on the display until the outage is acknowledged by pressing MEASURED FILL under "Confirm," after which PO disappears and the display returns to the Home screen. There is no problem behind it; it is the cabinet keeping a record of how warm the freezer got while the power was out.

Common Causes of PO

  • A household power outage or a tripped circuit breaker
  • The unit being unplugged during a move, remodel, or deep cleaning
  • A momentary utility blip that still lasted long enough to register

🔧 One Safe Check You Can Try

Locate the display's Confirm button (labeled "Measured Fill" on some shared controls) and press it once to clear the notice — there's no mechanical problem to chase here, it's simply a log entry that power was out long enough for the freezer to warm to 18°F or above.

⚠ Why You Shouldn't Go Further Than That

  • There's no failing part behind PO — it's a record of a past interruption, so hunting for something to repair inside the cabinet accomplishes nothing and only risks disturbing wiring that was fine to begin with.
  • Given that the alert threshold is tied to the freezer reaching 18°F, it's worth actually inspecting frozen items for texture and ice crystals before deciding nothing needs attention.
  • When this notice keeps returning with no outage you're aware of, the more useful step is having an electrician check the home's circuit rather than opening the refrigerator.

Opening a panel to inspect or repair something yourself doesn't automatically cancel your manufacturer's warranty — but it can risk accidental damage, and some manufacturers do have specific service conditions. Check your product's warranty terms, or ask us, before deciding.

Technical Reference

Code
PO
Appliance
KitchenAid refrigerator
Checked
September 2026

Code meanings can change between control generations. Before acting on a code, match the full model number on your appliance's rating label against the manual for that model. We are an independent repair service, not affiliated with Whirlpool Corporation.

Other Refrigerator Error Codes

Related Guides

Behavior Not Matching What's Described Above?

If PO is showing up earlier than expected, coming with other warning signs, or you're just not sure, book a trained technician for a proper diagnosis.

FAQ

PO FAQ

Not automatically — look for signs of partial thawing and refreezing, and when you're unsure how long power was actually out, err toward caution.

Recurring alerts with no obvious cause usually trace to something intermittent on the home's electrical side rather than the refrigerator itself.

Need a repair? We're ready to help. Call Now
Call Us Schedule