
The KBRA20ERSS is one of the KitchenAid refrigerators. It appears on KitchenAid’s US product site in December 2005 and nowhere after that. That dates the machine to around then: discontinued, and now roughly twenty years old. No published specification for this model was recovered. Rather than fill the gap with a figure borrowed from a similar-looking number, this page says only what the sources actually carry.
KitchenAid appends a two-digit production-revision code to the base number on the rating plate, and the codes actually observed for this model are KBRA20ERSS00. A plate reading one of those is still a KBRA20ERSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. At this age the work on a KBRA20ERSS is mostly mechanical and electrical rather than electronic — seals, fans, defrost components, switches and the start device. Those are the parts still in circulation for cabinets of this generation, and they are what we check availability on before any figure is put on a repair.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site in December 2005
- Rating-plate revision codes observed for this model: KBRA20ERSS00
- A KitchenAid owner's manual for this model is on record
Most Common Issues on This Model
Compressor start relay and overload faults, heard as a click every few minutes with no cooling following it
Electronic control failure, where the machine runs but no longer answers the panel
Evaporator fan bearing wear, ending in a fan that will not start from cold
Condenser coils choked with dust and pet hair, making the compressor run longer and hotter than it was meant to
