KitchenAid Refrigerator

KitchenAid KBBX104EPA

Model # KBBX104EPA

KitchenAid refrigerator repair

The KBBX104EPA packs 9.2 cu. ft. into a 21.3-inch-wide bottom-freezer cabinet. Sagging doors and worn hinge cams are a common issue on this model, keeping the seal from meeting the frame squarely, and a blocked drain at the back of the freezer floor is a quick, routine fix rather than a sealed-system problem.

Key Features

  • Bottom-freezer refrigerator
  • 21.3" wide
  • 9.2 cu. ft. total capacity
  • Entered the US market on 14 May 2015 per ENERGY STAR product data
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Sagging doors and worn hinge cams, which stop the seal meeting the cabinet squarely

02

Drain blockage at the back of the freezer floor - a routine clear rather than a sealed-system job

03

Sealed-system problems - a refrigerant leak or a restriction - the one problem worth weighing carefully against the value of the cabinet

04

A defrost cycle that has stopped running, so ice builds behind the freezer back panel until airflow chokes

Error Codes Common to This Model

Own This Model? Book a Diagnosis.

Have the model number to hand when you book, so the technician arrives knowing which parts this model uses and where it usually fails.

FAQ

KitchenAid KBBX104EPA FAQ

The KBBX104EPA plate is inside the refrigerator, on the left wall, in KitchenAid's own words. It is the adhesive label used across their major appliances, typically silver, and it carries both numbers. A photograph of the KBBX104EPA label is the most reliable thing you can send us.

No current listing for the KBBX104EPA was found, which in practice means sourcing is checked rather than assumed. That check on a KBBX104EPA happens before a price is given, so you are never paying for a diagnosis that ends in an unobtainable part.

With the refrigerator switched off at its supply, the fill valve, the fill tube and the ice maker module on a KBBX104EPA are checked in that order, because a fill tube frozen shut imitates a dead module exactly. The sealed system on a KBBX104EPA is very rarely the reason ice production stops.

Need a repair? We're ready to help. Call Now
Call Us Schedule