KitchenAid Range

KitchenAid KFED500ESS

Model # KFED500ESS

The KFED500ESS is one of the KitchenAid ranges. No published specification for this model was recovered. What survives is the model number and a dated record of when KitchenAid was showing it, and that is what is set out here. KitchenAid’s US product site carried it from September 2015 to July 2024, and nothing was captured for it afterwards.

A KFED500ESS in use today is about a decade old, and the door seal, the oven sensing and the surface controls account for most of what it gets called out for. Discontinued does not mean unrepairable, but it does mean availability of the specific part for a KFED500ESS is established before any figure is put on the job.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from September 2015 to July 2024
  • A KitchenAid owner's manual for this model is on record
  • KitchenAid published an installation dimension guide for it

Most Common Issues on This Model

01

Oven lamp, lamp holder and switch failures

02

A cooling fan running constantly, or not running at all

03

Storage or warming drawer runners worn, so the drawer binds

04

Oven door glass slipped in its frame after repeated heat cycles

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KFED500ESS FAQ

KitchenAid places the plate inside the oven's door, so that is where the KFED500ESS label will be. Model and serial are printed on the same sticker. Getting the KFED500ESS number exactly right matters most on an older machine, where parts diverged between otherwise identical-looking siblings.

Then the job stops there and you are told. The KFED500ESS has been out of production for long enough that this is a real possibility on some components, which is why availability for a KFED500ESS is checked before a diagnosis is charged for rather than after.

That is the display side of the control rather than the heating side. With the range switched off at its supply, the control on a KFED500ESS is tested to establish whether the display alone has failed, so that a working heating circuit on a KFED500ESS is not replaced along with it.

Need a repair? We're ready to help. Call Now
Call Us Schedule