KitchenAid Range

KitchenAid KESS907S

Model # KESS907S

The KESS907S is a KitchenAid range. No published specification for this model was recovered — no dimension, no capacity, no feature list — so none is stated here, and no figure has been taken from a neighbouring model number. The only dated record of it is a capture of KitchenAid’s US product site from February 2012.

A KESS907S in use today is about a decade old, and the door seal, the oven sensing and the surface controls account for most of what it gets called out for. Since the model is out of production, we settle what can still be supplied for it before the work is quoted.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in February 2012
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

A bake or broil element that has failed, so the oven heats slowly or from one side only, on an electric configuration

02

Oven temperature sensor drift, leaving the cavity hot or cold against the temperature set

03

An oven igniter that glows but no longer draws enough current to open the gas valve, on a gas configuration

04

Surface ignition clicking without lighting, usually moisture or debris at the igniter, on a gas configuration

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KESS907S FAQ

KitchenAid places the plate inside the oven's door, so that is where the KESS907S label will be. Model and serial are printed on the same sticker. Getting the KESS907S number exactly right matters most on an older machine, where parts diverged between otherwise identical-looking siblings.

Then the job stops there and you are told. The KESS907S has been out of production for long enough that this is a real possibility on some components, which is why availability for a KESS907S is checked before a diagnosis is charged for rather than after.

With the range switched off at its supply, and with the gas isolated where a gas configuration is fitted, a KESS907S comes forward once the anti-tip bracket at the rear has been released. Taking the weight properly is what prevents a scored floor, and the bracket on a KESS907S must be re-engaged afterwards.

Need a repair? We're ready to help. Call Now
Call Us Schedule