KitchenAid Range

KitchenAid KESC307HBT

Model # KESC307HBT

The KESC307HBT is a KitchenAid range sold in the United States. No published specification for this model was recovered — no dimension, no capacity, no feature list — so none is stated here, and no figure has been taken from a neighbouring model number. KitchenAid’s US product site shows it in August 2004, and no later capture carries it.

A KESC307HBT still in a kitchen today has twenty-odd years behind it, and that age shows first in the door seal, the oven sensing and the surface controls. Since the model is out of production, we settle what can still be supplied for it before the work is quoted.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in August 2004
  • No rating-plate revision code was observed for this model

Most Common Issues on This Model

01

A bake or broil element that has failed, so the oven heats slowly or from one side only, on an electric configuration

02

Oven temperature sensor drift, leaving the cavity hot or cold against the temperature set

03

An oven igniter that glows but no longer draws enough current to open the gas valve, on a gas configuration

04

Surface ignition clicking without lighting, usually moisture or debris at the igniter, on a gas configuration

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KESC307HBT FAQ

The plate inside the oven's door carries everything needed: the full KESC307HBT model string and the serial number beside it. With those two, a part for a KESC307HBT can be identified before anyone travels out, which saves a wasted visit.

The KESC307HBT is out of production, and whether repair beats replacement comes down to which component has gone. A seal, a switch or a control is usually straightforward economics on a KESC307HBT; a major assembly on a machine of this age often is not, and we will say which one you are looking at.

It is worth dealing with rather than ignoring, because the fan is what keeps the control housing within temperature. With the range switched off at its supply, the fan and its mounting on a KESC307HBT are inspected, and a fan on a KESC307HBT that has become noisy is normally a bearing rather than an obstruction.

Need a repair? We're ready to help. Call Now
Call Us Schedule