KitchenAid Range

KitchenAid KESC307HBS

Model # KESC307HBS

The KESC307HBS is a US-market KitchenAid range. No published specification for this model was recovered, and none is invented here to fill the space. KitchenAid’s US product site carried it from April 2001 to December 2002, and nothing was captured for it afterwards.

That puts the KESC307HBS two decades or more into use, which is where the door seal, the oven sensing and the surface controls start to decide how the machine behaves. The KESC307HBS is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from April 2001 to December 2002
  • No rating-plate revision code was observed for this model

Most Common Issues on This Model

01

Touch panel or clock display faults after long service

02

Convection fan noise or failure, where a convection cavity is fitted

03

A thermal fuse tripped after self-clean, leaving the oven without power while the surface still works

04

Oven lamp, lamp holder and switch failures

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KESC307HBS FAQ

KitchenAid places the plate inside the oven's door, so that is where the KESC307HBS label will be. Model and serial are printed on the same sticker. Getting the KESC307HBS number exactly right matters most on an older machine, where parts diverged between otherwise identical-looking siblings.

Then the job stops there and you are told. The KESC307HBS has been out of production for long enough that this is a real possibility on some components, which is why availability for a KESC307HBS is checked before a diagnosis is charged for rather than after.

With the range switched off at its supply, and with the gas isolated where a gas configuration is fitted, a KESC307HBS comes forward once the anti-tip bracket at the rear has been released. Taking the weight properly is what prevents a scored floor, and the bracket on a KESC307HBS must be re-engaged afterwards.

Need a repair? We're ready to help. Call Now
Call Us Schedule