The KUDS03FTSS is one of the KitchenAid dishwashers. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. KitchenAid’s US product site shows it in May 2012, and no later capture carries it.
KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KUDS03FTSS0, KUDS03FTSS1, KUDS03FTSS2, KUDS03FTSS3. A plate reading one of those is still a KUDS03FTSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. Ten years and more into service, a KUDS03FTSS is at the age where the door seal, the pump and the spray system are the usual suspects. Being out of production, a KUDS03FTSS has its parts position checked at the outset rather than after a diagnosis.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site in May 2012
- Rating-plate revision codes observed for this model: KUDS03FTSS0, KUDS03FTSS1, KUDS03FTSS2, KUDS03FTSS3
- A KitchenAid owner's manual for this model is on record
Most Common Issues on This Model
Control board and touch panel faults after years of steam and heat cycling
Rack rollers and rail wear, so a loaded rack drops or jams halfway out
A detergent dispenser flap that no longer opens at the right point in the cycle
Drain hose and clip wear at the connection, which leaks only while the pump is running