KitchenAid Dishwasher

KitchenAid KUDS02FRSS

Model # KUDS02FRSS

The KUDS02FRSS is a KitchenAid dishwasher. No published specification for this model was recovered, and none is invented here to fill the space. KitchenAid’s US product site shows it in December 2005, and no later capture carries it.

KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KUDS02FRSS1. A plate reading one of those is still a KUDS02FRSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A KUDS02FRSS still in a kitchen today has twenty-odd years behind it, and that age shows first in the door seal, the pump and the spray system. The KUDS02FRSS is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in December 2005
  • Rating-plate revision codes observed for this model: KUDS02FRSS1
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Scale build-up on the heater and in the spray system where the water is hard

02

A diverter or wash-arm feed fault that leaves one rack washing and the other not

03

A drain pump that hums but moves no water, leaving standing water in the sump at the end of a cycle

04

Wash motor bearing wear, heard as a rising whine or grinding through the cycle

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KUDS02FRSS FAQ

The plate on the left edge of the dishwasher's door carries everything needed: the full KUDS02FRSS model string and the serial number beside it. With those two, a part for a KUDS02FRSS can be identified before anyone travels out, which saves a wasted visit.

The KUDS02FRSS is out of production, and whether repair beats replacement comes down to which component has gone. A seal, a switch or a control is usually straightforward economics on a KUDS02FRSS; a major assembly on a machine of this age often is not, and we will say which one you are looking at.

Not necessarily, and it is the last thing assumed. On a KUDS02FRSS a cycle that stalls is more often a fill or drain fault, or a float switch held up, than a failed control. With the dishwasher switched off at its supply, those are proved first on a KUDS02FRSS before any board is condemned.

Need a repair? We're ready to help. Call Now
Call Us Schedule