KitchenAid Dishwasher

KitchenAid KUDP02FR

Model # KUDP02FR

The KUDP02FR is one of the KitchenAid dishwashers. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. The archive of KitchenAid’s US product site holds it from December 2005 through to November 2006, and no later capture carries it.

By now a KUDP02FR is an old machine, and the door seal, the pump and the spray system carry most of the wear. Being out of production, a KUDP02FR has its parts position checked at the outset rather than after a diagnosis.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from December 2005 to November 2006
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

A heating element that has lost continuity, so the load comes out clean but cold and wet

02

Spray arm jets and bearings blocked with debris, giving a patchy wash on the upper rack

03

An inlet valve stuck part open or failed shut, so the machine either overfills or never fills

04

Filter and sump blockages, the commonest reason for poor drainage and a smell from the tub

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KUDP02FR FAQ

KitchenAid's stated location for its dishwashers is on the left edge of the dishwasher's door, and the KUDP02FR follows it. The label is the one that matters: it gives the full KUDP02FR model string and the serial number, which together identify which production revision you have.

It affects supply rather than skill. Most of what fails on a KUDP02FR is a wear component that is still obtainable, and those repairs stay worthwhile. Where a KUDP02FR part has genuinely gone out of supply, that is said plainly rather than worked around.

Either the dispenser flap is not releasing or the tablet is being blocked by a dish. With the dishwasher switched off at its supply, the flap mechanism on a KUDP02FR is checked for grease and for a broken spring. A tablet that never dissolves on a KUDP02FR also means the wash water may not be reaching temperature, which is tested separately.

Need a repair? We're ready to help. Call Now
Call Us Schedule