KitchenAid Dishwasher

KitchenAid KUDP01ILWH

Model # KUDP01ILWH

The KUDP01ILWH is a KitchenAid dishwasher sold in the United States. No published specification for this model was recovered — no dimension, no capacity, no feature list — so none is stated here, and no figure has been taken from a neighbouring model number. KitchenAid’s US product site carried it from December 2002 to October 2003, and nothing was captured for it afterwards.

That puts the KUDP01ILWH two decades or more into use, which is where the door seal, the pump and the spray system start to decide how the machine behaves. Since the model is out of production, we settle what can still be supplied for it before the work is quoted.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from December 2002 to October 2003
  • No rating-plate revision code was observed for this model

Most Common Issues on This Model

01

Spray arm jets and bearings blocked with debris, giving a patchy wash on the upper rack

02

An inlet valve stuck part open or failed shut, so the machine either overfills or never fills

03

Filter and sump blockages, the commonest reason for poor drainage and a smell from the tub

04

A float switch held up, which the control reads as an overfill and stops the cycle

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KUDP01ILWH FAQ

No - front badging is a series name, not a model number. The KUDP01ILWH number comes off the plate on the left edge of the dishwasher's door, and that is the string to work from. Two machines wearing the same front badge can differ in parts, so the KUDP01ILWH plate is what settles it.

Often yes, and where they cannot we say so at the point we find out, so you are not billed for work that cannot be completed. That check comes first on a discontinued model like the KUDP01ILWH, not last.

Not as routine, but a seal that has gone hard is worth replacing before it leaks. With the dishwasher switched off at its supply, the seal face on a KUDP01ILWH can be inspected by hand: if it no longer springs back when pressed, it is at the end of its life on a KUDP01ILWH and is a small job to change.

Need a repair? We're ready to help. Call Now
Call Us Schedule