KitchenAid Dishwasher

KitchenAid KUDM25SHBT

Model # KUDM25SHBT

KUDM25SHBT is one of the dishwasher model numbers KitchenAid carried in the United States. The one specification line recovered for the KUDM25SHBT describes it as a Stainless Steel Interior Dishwasher 4 cycles, 3 options, with Whisper Quiet® sound reduction system, and this page does not go beyond it. KitchenAid’s US product site shows it in March 2000, and no later capture carries it.

The KUDM25SHBT is a colour or finish variant, printed verbatim on KitchenAid’s archived product page for the KUDM25SH. An owner whose plate reads KUDM25SH, or one of its other finishes, is looking at the same machine in a different colour. The other finishes printed on that same page are KUDM25SHBL, KUDM25SHWH. A KUDM25SHBT still in a kitchen today has twenty-odd years behind it, and that age shows first in the door seal, the pump and the spray system. The KUDM25SHBT is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.

Key Features

  • Stainless Steel Interior Dishwasher 4 cycles, 3 options, with Whisper Quiet® sound reduction system
  • Recorded on KitchenAid's US product site in March 2000
  • Printed as a colour or finish variant on KitchenAid's archived product page for the KUDM25SH

Most Common Issues on This Model

01

A perished door seal, showing as damp on the floor in front of the machine rather than an obvious flood

02

A heating element that has lost continuity, so the load comes out clean but cold and wet

03

Spray arm jets and bearings blocked with debris, giving a patchy wash on the upper rack

04

An inlet valve stuck part open or failed shut, so the machine either overfills or never fills

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KUDM25SHBT FAQ

The plate on the left edge of the dishwasher's door carries everything needed: the full KUDM25SHBT model string and the serial number beside it. With those two, a part for a KUDM25SHBT can be identified before anyone travels out, which saves a wasted visit.

The KUDM25SHBT is out of production, and whether repair beats replacement comes down to which component has gone. A seal, a switch or a control is usually straightforward economics on a KUDM25SHBT; a major assembly on a machine of this age often is not, and we will say which one you are looking at.

Yes, and it is one of the cheaper repairs. Rack rollers and rails on a KUDM25SHBT wear and the rack then drops at one corner. With the dishwasher switched off at its supply, the rollers on a KUDM25SHBT are inspected off the rails, and they are replaced rather than adjusted.

Need a repair? We're ready to help. Call Now
Call Us Schedule