KitchenAid Dishwasher

KitchenAid KUDK03FTSS

Model # KUDK03FTSS

KitchenAid sold the KUDK03FTSS as part of its US dishwasher range. No published specification for this model was recovered, and none is invented here to fill the space. The only dated record of it is a capture of KitchenAid’s US product site from May 2012.

KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KUDK03FTSS0, KUDK03FTSS1, KUDK03FTSS2, KUDK03FTSS3. A plate reading one of those is still a KUDK03FTSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A KUDK03FTSS in use today is about a decade old, and the door seal, the pump and the spray system account for most of what it gets called out for. The KUDK03FTSS is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in May 2012
  • Rating-plate revision codes observed for this model: KUDK03FTSS0, KUDK03FTSS1, KUDK03FTSS2, KUDK03FTSS3
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Scale build-up on the heater and in the spray system where the water is hard

02

A diverter or wash-arm feed fault that leaves one rack washing and the other not

03

A drain pump that hums but moves no water, leaving standing water in the sump at the end of a cycle

04

Wash motor bearing wear, heard as a rising whine or grinding through the cycle

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KUDK03FTSS FAQ

No - front badging is a series name, not a model number. The KUDK03FTSS number comes off the plate on the left edge of the dishwasher's door, and that is the string to work from. Two machines wearing the same front badge can differ in parts, so the KUDK03FTSS plate is what settles it.

Often yes, and where they cannot we say so at the point we find out, so you are not billed for work that cannot be completed. That check comes first on a discontinued model like the KUDK03FTSS, not last.

Not as routine, but a seal that has gone hard is worth replacing before it leaks. With the dishwasher switched off at its supply, the seal face on a KUDK03FTSS can be inspected by hand: if it no longer springs back when pressed, it is at the end of its life on a KUDK03FTSS and is a small job to change.

Need a repair? We're ready to help. Call Now
Call Us Schedule