
The KUDK03FT belongs to KitchenAid’s US dishwasher catalogue. No published specification for this model was recovered. What survives is the model number and a dated record of when KitchenAid was showing it, and that is what is set out here. It appears on KitchenAid’s US product site in May 2012 and nowhere after that.
That puts a KUDK03FT roughly ten to fifteen years into service, the point at which the door seal, the pump and the spray system tend to need attention. Discontinued does not mean unrepairable, but it does mean availability of the specific part for a KUDK03FT is established before any figure is put on the job.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site in May 2012
- A KitchenAid owner's manual for this model is on record
Most Common Issues on This Model
An inlet valve stuck part open or failed shut, so the machine either overfills or never fills
Filter and sump blockages, the commonest reason for poor drainage and a smell from the tub
A float switch held up, which the control reads as an overfill and stops the cycle
Control board and touch panel faults after years of steam and heat cycling
