The KUDE48FXSS is a KitchenAid dishwasher. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. KitchenAid’s US product site carried it from September 2013 to December 2016, and nothing was captured for it afterwards.
KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KUDE48FXSS0, KUDE48FXSS1, KUDE48FXSS2, KUDE48FXSS3, KUDE48FXSS6. A plate reading one of those is still a KUDE48FXSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A KUDE48FXSS in use today is about a decade old, and the door seal, the pump and the spray system account for most of what it gets called out for. Being out of production, a KUDE48FXSS has its parts position checked at the outset rather than after a diagnosis.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site from September 2013 to December 2016
- Rating-plate revision codes observed for this model: KUDE48FXSS0, KUDE48FXSS1, KUDE48FXSS2, KUDE48FXSS3, KUDE48FXSS6
- A KitchenAid owner's manual for this model is on record
- KitchenAid published an installation dimension guide for it
Most Common Issues on This Model
A diverter or wash-arm feed fault that leaves one rack washing and the other not
A drain pump that hums but moves no water, leaving standing water in the sump at the end of a cycle
Wash motor bearing wear, heard as a rising whine or grinding through the cycle
A door latch or latch switch that no longer tells the control the door is shut, so the cycle will not start