KitchenAid Dishwasher

KitchenAid KUDD01DSSS

Model # KUDD01DSSS

The KUDD01DSSS is a KitchenAid dishwasher. No published specification for this model was recovered. What survives is the model number and a dated record of when KitchenAid was showing it, and that is what is set out here. The archive of KitchenAid’s US product site holds it from July 2006 through to August 2015, and no later capture carries it.

KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KUDD01DSSS0. A plate reading one of those is still a KUDD01DSSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. By now a KUDD01DSSS is an old machine, and the door seal, the pump and the spray system carry most of the wear. Discontinued does not mean unrepairable, but it does mean availability of the specific part for a KUDD01DSSS is established before any figure is put on the job.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from July 2006 to August 2015
  • Rating-plate revision codes observed for this model: KUDD01DSSS0
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

An inlet valve stuck part open or failed shut, so the machine either overfills or never fills

02

Filter and sump blockages, the commonest reason for poor drainage and a smell from the tub

03

A float switch held up, which the control reads as an overfill and stops the cycle

04

Control board and touch panel faults after years of steam and heat cycling

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KUDD01DSSS FAQ

KitchenAid's stated location for its dishwashers is on the left edge of the dishwasher's door, and the KUDD01DSSS follows it. The label is the one that matters: it gives the full KUDD01DSSS model string and the serial number, which together identify which production revision you have.

It affects supply rather than skill. Most of what fails on a KUDD01DSSS is a wear component that is still obtainable, and those repairs stay worthwhile. Where a KUDD01DSSS part has genuinely gone out of supply, that is said plainly rather than worked around.

Either the dispenser flap is not releasing or the tablet is being blocked by a dish. With the dishwasher switched off at its supply, the flap mechanism on a KUDD01DSSS is checked for grease and for a broken spring. A tablet that never dissolves on a KUDD01DSSS also means the wash water may not be reaching temperature, which is tested separately.

Need a repair? We're ready to help. Call Now
Call Us Schedule