KitchenAid Refrigerator

KitchenAid KTRP22EKBT

Model # KTRP22EKBT

KitchenAid sold the KTRP22EKBT as part of its US refrigerator range. It appears on KitchenAid’s US product site in December 2003 and nowhere after that. That dates the machine to around then: discontinued, and now roughly twenty years old. No published specification for this model was recovered, so there is no capacity or dimension quoted on this page. A number lifted from a sibling model would be worse than silence.

At this age the work on a KTRP22EKBT is mostly mechanical and electrical rather than electronic — seals, fans, defrost components, switches and the start device. Those are the parts still in circulation for cabinets of this generation, and they are what we check availability on before any figure is put on a repair.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in December 2003

Most Common Issues on This Model

01

Door gasket hardened with age, so the seal no longer pulls the door tight against the cabinet

02

Temperature sensing wandered out of calibration with age, giving a cabinet that never settles

03

Water supply faults - valve, line or filter housing - on machines plumbed for water

04

Compressor start relay and overload faults, heard as a click every few minutes with no cooling following it

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KTRP22EKBT FAQ

Open the fresh food door and look at the left wall - KitchenAid puts the refrigerator model and serial plate inside the refrigerator, on the left wall, and the KTRP22EKBT is no exception. Having the full KTRP22EKBT number and the serial to hand is what lets a part be identified before anyone travels out.

The KTRP22EKBT is no longer in production. Fans, thermostats, door seals, switches and drain components are generally still obtainable for a cabinet of this generation; cabinet-specific trim and control boards are the ones that dry up. We check sourcing for the KTRP22EKBT first and quote second.

With the refrigerator switched off at its supply, a door on a KTRP22EKBT that will not close itself is usually a worn hinge or closer cam. It matters because a door left fractionally open runs the compressor continuously and frosts the evaporator, so on a KTRP22EKBT it turns into a cooling complaint if it is ignored.

Need a repair? We're ready to help. Call Now
Call Us Schedule