KitchenAid Oven

KitchenAid KOCE900HSS

Model # KOCE900HSS

The KOCE900HSS belongs to KitchenAid’s US wall oven catalogue. No published specification for this model was recovered. Rather than fill the gap with a figure borrowed from a similar-looking number, this page says only what the sources actually carry. KitchenAid’s US product site shows it in January 2024, and no later capture carries it.

KitchenAid appends a two-digit production-revision code to the base number on the rating plate, and the codes actually observed for this model are KOCE900HSS00, KOCE900HSS01. A plate reading one of those is still a KOCE900HSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A KOCE900HSS is comparatively recent, so faults on it are more often a single failed component than general wear. The KOCE900HSS is discontinued, so the parts question gets answered first and the price second.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in January 2024
  • Rating-plate revision codes observed for this model: KOCE900HSS00, KOCE900HSS01
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

A door seal hardened or torn, so the front of the oven runs hot

02

A latch mechanism seized by grease and heat over many years

03

On a double cavity, one oven working normally while the other will not come up to temperature

04

A failed bake or broil element, often visible as a break or a blistered section on the element itself

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KOCE900HSS FAQ

The plate inside the door carries everything needed: the full KOCE900HSS model string and the serial number beside it. With those two, a part for a KOCE900HSS can be identified before anyone travels out, which saves a wasted visit.

The KOCE900HSS is out of production, and whether repair beats replacement comes down to which component has gone. A seal, a switch or a control is usually straightforward economics on a KOCE900HSS; a major assembly on a machine of this age often is not, and we will say which one you are looking at.

The supply, before anything inside the oven. With the oven switched off at its supply, the circuit feeding a KOCE900HSS is confirmed, then the thermal fuse, then the control. Taking them in that order on a KOCE900HSS avoids condemning a board that was never at fault.

Need a repair? We're ready to help. Call Now
Call Us Schedule