KitchenAid Range

KitchenAid KESS908SPS

Model # KESS908SPS

KitchenAid sold the KESS908SPS as part of its US range range. No published specification for this model was recovered, and none is invented here to fill the space. KitchenAid’s US product site carried it from September 2013 to April 2015, and nothing was captured for it afterwards.

KitchenAid appends a two-digit production-revision code to the base number on the rating plate, and the codes actually observed for this model are KESS908SPS00, KESS908SPS01, KESS908SPS02, KESS908SPS04, KESS908SPS05, KESS908SPS06. A plate reading one of those is still a KESS908SPS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A KESS908SPS in use today is about a decade old, and the door seal, the oven sensing and the surface controls account for most of what it gets called out for. The KESS908SPS is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from September 2013 to April 2015
  • Rating-plate revision codes observed for this model: KESS908SPS00, KESS908SPS01, KESS908SPS02, KESS908SPS04, KESS908SPS05, KESS908SPS06
  • A KitchenAid owner's manual for this model is on record
  • KitchenAid published an installation dimension guide for it

Most Common Issues on This Model

01

Storage or warming drawer runners worn, so the drawer binds

02

Oven door glass slipped in its frame after repeated heat cycles

03

A bake or broil element that has failed, so the oven heats slowly or from one side only, on an electric configuration

04

Oven temperature sensor drift, leaving the cavity hot or cold against the temperature set

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KESS908SPS FAQ

No - front badging is a series name, not a model number. The KESS908SPS number comes off the plate inside the oven's door, and that is the string to work from. Two machines wearing the same front badge can differ in parts, so the KESS908SPS plate is what settles it.

Often yes, and where they cannot we say so at the point we find out, so you are not billed for work that cannot be completed. That check comes first on a discontinued model like the KESS908SPS, not last.

No preheat figure is published for the KESS908SPS that this page can quote, so the comparison that matters is with the machine's own past behaviour. With the range switched off at its supply, an element, an igniter or a sensor on a KESS908SPS is what typically causes that change, and each is measured directly.

Need a repair? We're ready to help. Call Now
Call Us Schedule