KitchenAid Range

KitchenAid KESS908S

Model # KESS908S

The KESS908S belongs to KitchenAid’s US range catalogue. No published specification for this model was recovered. What survives is the model number and a dated record of when KitchenAid was showing it, and that is what is set out here. It appears on KitchenAid’s US product site in February 2012 and nowhere after that.

That puts a KESS908S roughly ten to fifteen years into service, the point at which the door seal, the oven sensing and the surface controls tend to need attention. Discontinued does not mean unrepairable, but it does mean availability of the specific part for a KESS908S is established before any figure is put on the job.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in February 2012
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

A door lock stuck after a self-clean cycle

02

Control board relay faults, where one function is dead and the rest of the range carries on

03

Touch panel or clock display faults after long service

04

Convection fan noise or failure, where a convection cavity is fitted

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KESS908S FAQ

For a KESS908S, look inside the oven's door. That is the location KitchenAid publishes for its ranges, and the label there is the authoritative source for the number - front-panel badging and box labels often differ from what is actually on the KESS908S.

Sometimes, yes - a discontinued model like the KESS908S can mean waiting on a specialist supplier for an obsolete part. We establish that on a KESS908S before the job starts, so the choice between waiting, substituting where a substitute genuinely exists, and replacing the machine is yours to make with the facts in front of you.

Usually not. With the range switched off at its supply, the zone's switch, its connection and the element on a KESS908S are tested in that order, and on a KESS908S the fault is most often the switch or a burnt receptacle rather than anything in the control.

Need a repair? We're ready to help. Call Now
Call Us Schedule