KERC507HBS Repair | KitchenAid Appliance Repair

The KERC507HBS is a US-market KitchenAid range. KitchenAid’s own product material describes it as a 30″ Freestanding Electric Range with Ceramic-glass Cooktop, and that description is the whole of the published specification recovered for the KERC507HBS. It was on KitchenAid’s US product site from February 2000 to February 2003 and gone after that.

A range of that vintage is two decades or more into service, and the door seal, the oven sensing and the surface controls are long past as-new. Since the model is out of production, we settle what can still be supplied for it before the work is quoted.

Key Features

30" Freestanding Electric Range with Ceramic-glass Cooktop
Recorded on KitchenAid's US product site from February 2000 to February 2003
No rating-plate revision code was observed for this model

Most Common Issues on This Model

01

Convection fan noise or failure, where a convection cavity is fitted

02

A thermal fuse tripped after self-clean, leaving the oven without power while the surface still works

03

Oven lamp, lamp holder and switch failures

04

A cooling fan running constantly, or not running at all

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Call (844) 405-1464 Schedule a Visit

FAQ

KitchenAid KERC507HBS FAQ

KitchenAid gives the location for its ranges as inside the oven's door, and that is where the KERC507HBS plate sits. It is an adhesive label, typically silver on major appliances, carrying the model number and the serial number together. Read the whole KERC507HBS string off the label rather than from memory, because it sits in a family of very similar numbers.

Production of the KERC507HBS ended some time ago. That does not rule out a repair - the wear items are largely shared across a generation - but it does mean the parts question on a KERC507HBS is settled before any figure is put on the work.

With the range switched off at its supply, the oven temperature sensor on a KERC507HBS is the first part measured, because a drifted sensor makes the control heat to the wrong figure. Only once the sensor on a KERC507HBS has been proved are the heating components considered.

KitchenAid KERC507HBS

Key Features

Most Common Issues on This Model

Error Codes Common to This Model

Indicator Flashing

Indicator or Hot Light On

Lock

FC E5

Locked, Lock or Loc

FC E6

Own This Model? We Know It Well.

KitchenAid KERC507HBS FAQ