KitchenAid Range

KitchenAid KERC507HBL

Model # KERC507HBL

KitchenAid sold the KERC507HBL as part of its US range range. The one specification line recovered for the KERC507HBL describes it as a 30″ Freestanding Electric Range with Ceramic-glass Cooktop, and this page does not go beyond it. The archive of KitchenAid’s US product site holds it from February 2000 through to February 2004, and no later capture carries it.

By now a KERC507HBL is an old machine, and the door seal, the oven sensing and the surface controls carry most of the wear. The KERC507HBL is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.

Key Features

  • 30" Freestanding Electric Range with Ceramic-glass Cooktop
  • Recorded on KitchenAid's US product site from February 2000 to February 2004
  • No rating-plate revision code was observed for this model

Most Common Issues on This Model

01

A bake or broil element that has failed, so the oven heats slowly or from one side only, on an electric configuration

02

Oven temperature sensor drift, leaving the cavity hot or cold against the temperature set

03

A surface element or its infinite switch failing, so one zone stays cold or runs at full heat

04

Door hinge and seal wear, letting heat out of the front of the oven

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KERC507HBL FAQ

KitchenAid's stated location for its ranges is inside the oven's door, and the KERC507HBL follows it. The label is the one that matters: it gives the full KERC507HBL model string and the serial number, which together identify which production revision you have.

It affects supply rather than skill. Most of what fails on a KERC507HBL is a wear component that is still obtainable, and those repairs stay worthwhile. Where a KERC507HBL part has genuinely gone out of supply, that is said plainly rather than worked around.

On most builds it can, but it is heavy and the hinges are under spring tension. With the range switched off at its supply and the oven cold, the hinge locks on a KERC507HBL are engaged before the door is lifted. If the door of a KERC507HBL does not release easily, it is better left to a technician.

Need a repair? We're ready to help. Call Now
Call Us Schedule