KitchenAid Range

KitchenAid KERA807P

Model # KERA807P

KitchenAid sold the KERA807P as part of its US range range. No published specification for this model was recovered — no dimension, no capacity, no feature list — so none is stated here, and no figure has been taken from a neighbouring model number. The only dated record of it is a capture of KitchenAid’s US product site from April 2005.

That puts the KERA807P two decades or more into use, which is where the door seal, the oven sensing and the surface controls start to decide how the machine behaves. Since the model is out of production, we settle what can still be supplied for it before the work is quoted.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site in April 2005
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

A thermal fuse tripped after self-clean, leaving the oven without power while the surface still works

02

Oven lamp, lamp holder and switch failures

03

A cooling fan running constantly, or not running at all

04

Storage or warming drawer runners worn, so the drawer binds

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KERA807P FAQ

KitchenAid places the plate inside the oven's door, so that is where the KERA807P label will be. Model and serial are printed on the same sticker. Getting the KERA807P number exactly right matters most on an older machine, where parts diverged between otherwise identical-looking siblings.

Then the job stops there and you are told. The KERA807P has been out of production for long enough that this is a real possibility on some components, which is why availability for a KERA807P is checked before a diagnosis is charged for rather than after.

With the range switched off at its supply, and with the gas isolated where a gas configuration is fitted, a KERA807P comes forward once the anti-tip bracket at the rear has been released. Taking the weight properly is what prevents a scored floor, and the bracket on a KERA807P must be re-engaged afterwards.

Need a repair? We're ready to help. Call Now
Call Us Schedule