KitchenAid Oven

KitchenAid KEBS207D

Model # KEBS207D

KitchenAid sold the KEBS207D as part of its US wall oven range. What KitchenAid published about the KEBS207D is that it is a Superba® 30″ Built-in Electric Double Oven with Self-cleaning Thermal Convection® Upper — Thermal Lower, and that single line is all the specification there is. It appears on KitchenAid’s US product site in January 2000 and nowhere after that.

A wall oven of that vintage is two decades or more into service, and the door seal, the hinges and the heating elements are long past as-new. Being out of production, a KEBS207D has its parts position checked at the outset rather than after a diagnosis.

Key Features

  • Superba® 30" Built-in Electric Double Oven with Self-cleaning Thermal Convection® Upper - Thermal Lower
  • Recorded on KitchenAid's US product site in January 2000
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

On a double cavity, one oven working normally while the other will not come up to temperature

02

A failed bake or broil element, often visible as a break or a blistered section on the element itself

03

Oven temperature sensor drift, so the cavity runs hot or cold against the temperature set

04

Door hinge wear, which lets heat escape at the top of the door and upsets the cavity temperature

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KEBS207D FAQ

KitchenAid gives the location for its wall ovens as inside the door, and that is where the KEBS207D plate sits. It is an adhesive label, typically silver on major appliances, carrying the model number and the serial number together. Read the whole KEBS207D string off the label rather than from memory, because it sits in a family of very similar numbers.

Production of the KEBS207D ended some time ago. That does not rule out a repair - the wear items are largely shared across a generation - but it does mean the parts question on a KEBS207D is settled before any figure is put on the work.

With the oven switched off at its supply, the oven temperature sensor on a KEBS207D is the part tested first, because a sensor that has drifted reports the wrong cavity temperature and the control heats to it faithfully. Element and control faults on a KEBS207D are considered after the sensor has been proved.

Need a repair? We're ready to help. Call Now
Call Us Schedule