KitchenAid Dishwasher

KitchenAid KDTM354ESS

Model # KDTM354ESS

The KDTM354ESS is a KitchenAid dishwasher. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. It sat in KitchenAid’s US catalogue from July 2015 until October 2015, which is the window the archive records.

Ten years and more into service, a KDTM354ESS is at the age where the door seal, the pump and the spray system are the usual suspects. Being out of production, a KDTM354ESS has its parts position checked at the outset rather than after a diagnosis.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from July 2015 to October 2015
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Control board and touch panel faults after years of steam and heat cycling

02

Rack rollers and rail wear, so a loaded rack drops or jams halfway out

03

A detergent dispenser flap that no longer opens at the right point in the cycle

04

Drain hose and clip wear at the connection, which leaks only while the pump is running

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KDTM354ESS FAQ

The plate on the left edge of the dishwasher's door carries everything needed: the full KDTM354ESS model string and the serial number beside it. With those two, a part for a KDTM354ESS can be identified before anyone travels out, which saves a wasted visit.

The KDTM354ESS is out of production, and whether repair beats replacement comes down to which component has gone. A seal, a switch or a control is usually straightforward economics on a KDTM354ESS; a major assembly on a machine of this age often is not, and we will say which one you are looking at.

Not necessarily, and it is the last thing assumed. On a KDTM354ESS a cycle that stalls is more often a fill or drain fault, or a float switch held up, than a failed control. With the dishwasher switched off at its supply, those are proved first on a KDTM354ESS before any board is condemned.

Need a repair? We're ready to help. Call Now
Call Us Schedule