KitchenAid Dishwasher

KitchenAid KCDI250X

Model # KCDI250X

KitchenAid sold the KCDI250X as part of its US dishwasher range. No published specification for this model was recovered, and none is invented here to fill the space. It was on KitchenAid’s US product site from June 2001 to December 2005 and gone after that.

A dishwasher of that vintage is two decades or more into service, and the door seal, the pump and the spray system are long past as-new. The KCDI250X is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from June 2001 to December 2005
  • No rating-plate revision code was observed for this model

Most Common Issues on This Model

01

Scale build-up on the heater and in the spray system where the water is hard

02

A diverter or wash-arm feed fault that leaves one rack washing and the other not

03

A drain pump that hums but moves no water, leaving standing water in the sump at the end of a cycle

04

Wash motor bearing wear, heard as a rising whine or grinding through the cycle

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KCDI250X FAQ

For a KCDI250X, look on the left edge of the dishwasher's door. That is the location KitchenAid publishes for its dishwashers, and the label there is the authoritative source for the number - front-panel badging and box labels often differ from what is actually on the KCDI250X.

Sometimes, yes - a discontinued model like the KCDI250X can mean waiting on a specialist supplier for an obsolete part. We establish that on a KCDI250X before the job starts, so the choice between waiting, substituting where a substitute genuinely exists, and replacing the machine is yours to make with the facts in front of you.

It can shorten its life, because the pump on a KCDI250X runs against a restriction every cycle. With the dishwasher switched off at its supply, clearing the filter and checking the hose run for a sag or a kink is the preventative work, and on a KCDI250X it is cheaper than the pump.

Need a repair? We're ready to help. Call Now
Call Us Schedule