KitchenAid Refrigerator

KitchenAid KBBX102MPA

Model # KBBX102MPA

The KBBX102MPA is a US-market KitchenAid refrigerator, recorded by its source as a bottom-freezer refrigerator, 21.9″ wide, 8.8 cu. ft., standard-depth. The US ENERGY STAR product data puts it on the market from 2 March 2022, with no confirmation either way about whether it is still sold new. Nothing beyond what that source states is claimed here, and no figure has been carried across from a neighbouring model number.

Whatever the KBBX102MPA turns out to need, the availability of the part is established before the work is quoted, so a diagnosis never ends in a repair that cannot be finished.

Key Features

  • Bottom-freezer refrigerator
  • 21.9" wide
  • 8.8 cu. ft. total capacity
  • Standard-depth cabinet
  • Entered the US market on 2 March 2022 per ENERGY STAR product data

Most Common Issues on This Model

01

Defrost faults - heater, thermostat or timer - leaving the evaporator packed with frost and the cabinet slowly warming

02

An ice maker that fills but will not eject, or a bin that has frozen into one solid block

03

Lighting and door-switch problems, worth ruling out before anything is assumed about the cooling side

04

Cracked door bins and shelf trim, ordinary wear on a cabinet of this age

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KBBX102MPA FAQ

Open the fresh food door and look at the left wall - KitchenAid puts the refrigerator model and serial plate inside the refrigerator, on the left wall, and the KBBX102MPA is no exception. Having the full KBBX102MPA number and the serial to hand is what lets a part be identified before anyone travels out.

The KBBX102MPA has not been seen in a current KitchenAid listing, so it is best treated as out of production. We establish what can still be supplied for a KBBX102MPA before quoting any work, rather than the other way round.

With the refrigerator switched off at its supply, a door on a KBBX102MPA that will not close itself is usually a worn hinge or closer cam. It matters because a door left fractionally open runs the compressor continuously and frosts the evaporator, so on a KBBX102MPA it turns into a cooling complaint if it is ignored.

Need a repair? We're ready to help. Call Now
Call Us Schedule