KitchenAid Range

KitchenAid KGST307HWH

Model # KGST307HWH

The KGST307HWH is one of the KitchenAid ranges. No published specification for this model was recovered, and none is invented here to fill the space. KitchenAid’s US product site carried it from April 2003 to November 2016, and nothing was captured for it afterwards.

That puts the KGST307HWH two decades or more into use, which is where the door seal, the oven sensing and the surface controls start to decide how the machine behaves. The KGST307HWH is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from April 2003 to November 2016
  • No rating-plate revision code was observed for this model

Most Common Issues on This Model

01

Storage or warming drawer runners worn, so the drawer binds

02

Oven door glass slipped in its frame after repeated heat cycles

03

A bake or broil element that has failed, so the oven heats slowly or from one side only, on an electric configuration

04

Oven temperature sensor drift, leaving the cavity hot or cold against the temperature set

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KGST307HWH FAQ

KitchenAid places the plate inside the oven's door, so that is where the KGST307HWH label will be. Model and serial are printed on the same sticker. Getting the KGST307HWH number exactly right matters most on an older machine, where parts diverged between otherwise identical-looking siblings.

Then the job stops there and you are told. The KGST307HWH has been out of production for long enough that this is a real possibility on some components, which is why availability for a KGST307HWH is checked before a diagnosis is charged for rather than after.

With the range switched off at its supply, and with the gas isolated where a gas configuration is fitted, a KGST307HWH comes forward once the anti-tip bracket at the rear has been released. Taking the weight properly is what prevents a scored floor, and the bracket on a KGST307HWH must be re-engaged afterwards.

Need a repair? We're ready to help. Call Now
Call Us Schedule