KitchenAid Range

KitchenAid KGST307HBL

Model # KGST307HBL

The KGST307HBL is a KitchenAid range sold in the United States. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. The archive of KitchenAid’s US product site holds it from December 2003 through to August 2004, and no later capture carries it.

By now a KGST307HBL is an old machine, and the door seal, the oven sensing and the surface controls carry most of the wear. Being out of production, a KGST307HBL has its parts position checked at the outset rather than after a diagnosis.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from December 2003 to August 2004
  • No rating-plate revision code was observed for this model

Most Common Issues on This Model

01

Oven door glass slipped in its frame after repeated heat cycles

02

A bake or broil element that has failed, so the oven heats slowly or from one side only, on an electric configuration

03

Oven temperature sensor drift, leaving the cavity hot or cold against the temperature set

04

An oven igniter that glows but no longer draws enough current to open the gas valve, on a gas configuration

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KGST307HBL FAQ

KitchenAid's stated location for its ranges is inside the oven's door, and the KGST307HBL follows it. The label is the one that matters: it gives the full KGST307HBL model string and the serial number, which together identify which production revision you have.

It affects supply rather than skill. Most of what fails on a KGST307HBL is a wear component that is still obtainable, and those repairs stay worthwhile. Where a KGST307HBL part has genuinely gone out of supply, that is said plainly rather than worked around.

On a gas configuration it points at the oven igniter, which can glow and still fail to draw enough current to open the valve. With the range switched off at its supply and the gas isolated, the igniter on a KGST307HBL is measured rather than judged by eye, because a KGST307HBL igniter that looks healthy is often the fault.

Need a repair? We're ready to help. Call Now
Call Us Schedule