KitchenAid sold the KGRS505XBL as part of its US range range. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. The only dated record of it is a capture of KitchenAid’s US product site from August 2014.
KitchenAid appends a two-digit production-revision code to the base number on the rating plate, and the codes actually observed for this model are KGRS505XBL00, KGRS505XBL01, KGRS505XBL02, KGRS505XBL04. A plate reading one of those is still a KGRS505XBL; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A KGRS505XBL in use today is about a decade old, and the door seal, the oven sensing and the surface controls account for most of what it gets called out for. Being out of production, a KGRS505XBL has its parts position checked at the outset rather than after a diagnosis.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site in August 2014
- Rating-plate revision codes observed for this model: KGRS505XBL00, KGRS505XBL01, KGRS505XBL02, KGRS505XBL04
- A KitchenAid owner's manual for this model is on record
Most Common Issues on This Model
Oven door glass slipped in its frame after repeated heat cycles
A bake or broil element that has failed, so the oven heats slowly or from one side only, on an electric configuration
Oven temperature sensor drift, leaving the cavity hot or cold against the temperature set
An oven igniter that glows but no longer draws enough current to open the gas valve, on a gas configuration