KitchenAid Range

KitchenAid KERC608LSS

Model # KERC608LSS

The KERC608LSS is a KitchenAid range sold in the United States. No published specification for this model was recovered — no dimension, no capacity, no feature list — so none is stated here, and no figure has been taken from a neighbouring model number. The archive of KitchenAid’s US product site holds it from August 2003 through to August 2004, and no later capture carries it.

KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KERC608LSS0. A plate reading one of those is still a KERC608LSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. By now a KERC608LSS is an old machine, and the door seal, the oven sensing and the surface controls carry most of the wear. Since the model is out of production, we settle what can still be supplied for it before the work is quoted.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from August 2003 to August 2004
  • Rating-plate revision codes observed for this model: KERC608LSS0
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

A thermal fuse tripped after self-clean, leaving the oven without power while the surface still works

02

Oven lamp, lamp holder and switch failures

03

A cooling fan running constantly, or not running at all

04

Storage or warming drawer runners worn, so the drawer binds

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KERC608LSS FAQ

KitchenAid's stated location for its ranges is inside the oven's door, and the KERC608LSS follows it. The label is the one that matters: it gives the full KERC608LSS model string and the serial number, which together identify which production revision you have.

It affects supply rather than skill. Most of what fails on a KERC608LSS is a wear component that is still obtainable, and those repairs stay worthwhile. Where a KERC608LSS part has genuinely gone out of supply, that is said plainly rather than worked around.

On a gas configuration it points at the oven igniter, which can glow and still fail to draw enough current to open the valve. With the range switched off at its supply and the gas isolated, the igniter on a KERC608LSS is measured rather than judged by eye, because a KERC608LSS igniter that looks healthy is often the fault.

Need a repair? We're ready to help. Call Now
Call Us Schedule