KitchenAid Oven

KitchenAid KEHU309SSS

Model # KEHU309SSS

The KEHU309SSS is one of the KitchenAid wall ovens. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. It was still listed on KitchenAid’s US product site at the last capture used here, June 2025, which makes it a current model rather than a discontinued one.

KitchenAid appends a two-digit production-revision code to the base number on the rating plate, and the codes actually observed for this model are KEHU309SSS00, KEHU309SSS02, KEHU309SSS03, KEHU309SSS04, KEHU309SSS05. A plate reading one of those is still a KEHU309SSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A KEHU309SSS in use today is about a decade old, and the door seal, the hinges and the heating elements account for most of what it gets called out for. The KEHU309SSS being current, supply is not the problem it can be on older machines; we still check the individual part before quoting.

Key Features

  • No published specification for this model was recovered
  • Still recorded on KitchenAid's US product site at the June 2025 capture
  • Rating-plate revision codes observed for this model: KEHU309SSS00, KEHU309SSS02, KEHU309SSS03, KEHU309SSS04, KEHU309SSS05
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Door glass that has slipped in the frame, or an inner pane that has cracked

02

Relay failure on the control board, so one element never energises while the rest of the oven works

03

Heat damage at the rear terminal block and its wiring

04

A door seal hardened or torn, so the front of the oven runs hot

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KEHU309SSS FAQ

KitchenAid places the plate inside the door, so that is where the KEHU309SSS label will be. Model and serial are printed on the same sticker. Getting the KEHU309SSS number exactly right matters most on an older machine, where parts diverged between otherwise identical-looking siblings.

The KEHU309SSS is a current model rather than a discontinued one, so parts supply is in good shape. We still confirm availability for the specific KEHU309SSS component that has failed before quoting, because that is how the job gets priced honestly.

The control on a KEHU309SSS normally works to the new sensor without adjustment, but the cavity is checked against a separate thermometer afterwards. That confirms the KEHU309SSS is now holding the temperature it is set to rather than assuming it.

Need a repair? We're ready to help. Call Now
Call Us Schedule