KitchenAid Dishwasher

KitchenAid KUDS01DLSP

Model # KUDS01DLSP

The KUDS01DLSP is a US-market KitchenAid dishwasher. No published specification for this model was recovered. What survives is the model number and a dated record of when KitchenAid was showing it, and that is what is set out here. It sat in KitchenAid’s US catalogue from December 2003 until August 2004, which is the window the archive records.

KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KUDS01DLSP0. A plate reading one of those is still a KUDS01DLSP; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A KUDS01DLSP still in a kitchen today has twenty-odd years behind it, and that age shows first in the door seal, the pump and the spray system. Discontinued does not mean unrepairable, but it does mean availability of the specific part for a KUDS01DLSP is established before any figure is put on the job.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from December 2003 to August 2004
  • Rating-plate revision codes observed for this model: KUDS01DLSP0
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

An inlet valve stuck part open or failed shut, so the machine either overfills or never fills

02

Filter and sump blockages, the commonest reason for poor drainage and a smell from the tub

03

A float switch held up, which the control reads as an overfill and stops the cycle

04

Control board and touch panel faults after years of steam and heat cycling

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KUDS01DLSP FAQ

The plate on the left edge of the dishwasher's door carries everything needed: the full KUDS01DLSP model string and the serial number beside it. With those two, a part for a KUDS01DLSP can be identified before anyone travels out, which saves a wasted visit.

The KUDS01DLSP is out of production, and whether repair beats replacement comes down to which component has gone. A seal, a switch or a control is usually straightforward economics on a KUDS01DLSP; a major assembly on a machine of this age often is not, and we will say which one you are looking at.

Not necessarily, and it is the last thing assumed. On a KUDS01DLSP a cycle that stalls is more often a fill or drain fault, or a float switch held up, than a failed control. With the dishwasher switched off at its supply, those are proved first on a KUDS01DLSP before any board is condemned.

Need a repair? We're ready to help. Call Now
Call Us Schedule