The KUDP02IR belongs to KitchenAid’s US dishwasher catalogue. No published specification for this model was recovered, and none is invented here to fill the space. KitchenAid’s US product site carried it from December 2005 to November 2006, and nothing was captured for it afterwards.
That puts the KUDP02IR two decades or more into use, which is where the door seal, the pump and the spray system start to decide how the machine behaves. The KUDP02IR is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site from December 2005 to November 2006
- A KitchenAid owner's manual for this model is on record
Most Common Issues on This Model
A perished door seal, showing as damp on the floor in front of the machine rather than an obvious flood
A heating element that has lost continuity, so the load comes out clean but cold and wet
Spray arm jets and bearings blocked with debris, giving a patchy wash on the upper rack
An inlet valve stuck part open or failed shut, so the machine either overfills or never fills