The KUDP01FLWH belongs to KitchenAid’s US dishwasher catalogue. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. It sat in KitchenAid’s US catalogue from June 2003 until October 2003, which is the window the archive records.
KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KUDP01FLWH1, KUDP01FLWH3. A plate reading one of those is still a KUDP01FLWH; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A KUDP01FLWH still in a kitchen today has twenty-odd years behind it, and that age shows first in the door seal, the pump and the spray system. Being out of production, a KUDP01FLWH has its parts position checked at the outset rather than after a diagnosis.
Key Features
- No published specification for this model was recovered
- Recorded on KitchenAid's US product site from June 2003 to October 2003
- Rating-plate revision codes observed for this model: KUDP01FLWH1, KUDP01FLWH3
- A KitchenAid owner's manual for this model is on record
Most Common Issues on This Model
A diverter or wash-arm feed fault that leaves one rack washing and the other not
A drain pump that hums but moves no water, leaving standing water in the sump at the end of a cycle
Wash motor bearing wear, heard as a rising whine or grinding through the cycle
A door latch or latch switch that no longer tells the control the door is shut, so the cycle will not start