KitchenAid Appliance Specialists · Licensed & Insured · Serving 5 Major Metro Areas ☎ (844) 405-1464
Support and Repair KitchenAid
☎ (844) 405-1464 Schedule a Visit
KitchenAid Oven

KitchenAid KODE507EBL

Model # KODE507EBL

Call (844) 405-1464 Schedule a Visit

KitchenAid sold the KODE507EBL as part of its US wall oven range. No published specification for this model was recovered, and none is invented here to fill the space. It sat in KitchenAid’s US catalogue from April 2015 until September 2015, which is the window the archive records.

Ten years and more into service, a KODE507EBL is at the age where the door seal, the hinges and the heating elements are the usual suspects. The KODE507EBL is no longer made, so what can actually be obtained for it is the first thing looked at, not the last.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from April 2015 to September 2015
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Oven lamp and lamp holder failures

02

Door glass that has slipped in the frame, or an inner pane that has cracked

03

Relay failure on the control board, so one element never energises while the rest of the oven works

04

Heat damage at the rear terminal block and its wiring

Error Codes Common to This Model

Locked, Lock or Loc

KitchenAid Wall Oven Locked, Lock or Loc Display

Probe or Insert Probe

KitchenAid Wall Oven Probe or Insert Probe Message

PUSH or PSH

KitchenAid Wall Oven PUSH or PSH Display

FC E2

KitchenAid Wall Oven FC E2 Error Code (Cannot Connect to the Router)

Demo Mode

KitchenAid Wall Oven Demo Mode

FC E3

KitchenAid Wall Oven FC E3 Error Code (Cannot Connect to the Router)

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

Call (844) 405-1464 Schedule a Visit
FAQ

KitchenAid KODE507EBL FAQ

The plate inside the door carries everything needed: the full KODE507EBL model string and the serial number beside it. With those two, a part for a KODE507EBL can be identified before anyone travels out, which saves a wasted visit.

The KODE507EBL is out of production, and whether repair beats replacement comes down to which component has gone. A seal, a switch or a control is usually straightforward economics on a KODE507EBL; a major assembly on a machine of this age often is not, and we will say which one you are looking at.

Yes, and it is usually the membrane rather than the board. With the oven switched off at its supply, the panel on a KODE507EBL is separated from the control to establish which of the two has failed, so that only the failed part on a KODE507EBL is replaced.

Need a repair? We're ready to help. Call Now
Call Us Schedule