KitchenAid Range

KitchenAid KESC308LSS

Model # KESC308LSS

The KESC308LSS is one of the KitchenAid ranges. No published specification for this model was recovered, so there is no dimension or capacity quoted on this page. A number lifted from a sibling model would be worse than silence. It was on KitchenAid’s US product site from April 2002 to August 2004 and gone after that.

KitchenAid appends a production-revision code to the base number on the rating plate, and the codes actually observed for this model are KESC308LSS0. A plate reading one of those is still a KESC308LSS; the suffix identifies which production revision you have, and it occasionally decides which version of a part fits. A range of that vintage is two decades or more into service, and the door seal, the oven sensing and the surface controls are long past as-new. Being out of production, a KESC308LSS has its parts position checked at the outset rather than after a diagnosis.

Key Features

  • No published specification for this model was recovered
  • Recorded on KitchenAid's US product site from April 2002 to August 2004
  • Rating-plate revision codes observed for this model: KESC308LSS0
  • A KitchenAid owner's manual for this model is on record

Most Common Issues on This Model

01

Oven door glass slipped in its frame after repeated heat cycles

02

A bake or broil element that has failed, so the oven heats slowly or from one side only, on an electric configuration

03

Oven temperature sensor drift, leaving the cavity hot or cold against the temperature set

04

An oven igniter that glows but no longer draws enough current to open the gas valve, on a gas configuration

Error Codes Common to This Model

Own This Model? We Know It Well.

Book a technician who has already diagnosed and repaired this exact model dozens of times.

FAQ

KitchenAid KESC308LSS FAQ

For a KESC308LSS, look inside the oven's door. That is the location KitchenAid publishes for its ranges, and the label there is the authoritative source for the number - front-panel badging and box labels often differ from what is actually on the KESC308LSS.

Sometimes, yes - a discontinued model like the KESC308LSS can mean waiting on a specialist supplier for an obsolete part. We establish that on a KESC308LSS before the job starts, so the choice between waiting, substituting where a substitute genuinely exists, and replacing the machine is yours to make with the facts in front of you.

Usually not. With the range switched off at its supply, the zone's switch, its connection and the element on a KESC308LSS are tested in that order, and on a KESC308LSS the fault is most often the switch or a burnt receptacle rather than anything in the control.

Need a repair? We're ready to help. Call Now
Call Us Schedule